Looking after your water supply is vital. Part of this is inspecting it to check whether it’s safe. Using our water testing and sampling service, you can do just that. We supply free sample bottles that are sterile to provide accurate results. You can fill them up and send them back to us for examination.
Water testing isn’t difficult by any stretch. After all, young lifeguards at pools across the UK do it every day with success. Nevertheless, it’s not as if you can sleepwalk through the entire ordeal and expect precise results. The following are some of the sources of error you find with water analysis.
The sampling location is one of the primary sources of error. You must take a sample that represents the whole tank. Never take one from the surface because the exterior is subject to particular conditions. It’s not in the immediate sector of a return line for this same reason. What you should do is slot your bottle in bottom side up. This way, the trapped air will keep the water out temporarily. Afterwards, turn it right side up once you reach elbow depth and allow it to fill.
The water chemistry is another main source of error. If you have recently treated your water, make sure that enough time passes before you retest. In addition, there could be intrusions within the water that lead to the incorrect result. In some cases, no colours may develop. Intrusions can include iron, copper, a monopersulfate-based oxidiser, and a high volume of sanitiser.
At Nationwide Water Solutions, we provide our clients with the fastest possible turnarounds on every sample we receive. Following the water testing and sampling service, if we discover that your supply is currently contaminated, our team shall offer you system disinfection solutions.
Contact us today if you’re worried about your own water.